Mounting Plates for 3 & 6-Jaw Chucks
  cush

 

  •             For Independent Chucks - Series Y10-104, Y10-174, Y10-114, Y10-161,
  •             Y10-171 (Old Type Design)
    •            
    •             Mounting plates are precision machined
    •             to suit the spindle nose of your machine.
                  For maximum accuracy of Accra-Set™
    •             mounting plates, mount plate on machine spindle nose,
    •             place a dial indicator on the chuck side face of the adapter close
    •             to the mounting holes, rotate the adapter,
    •             and if the total indicator reading (TIR) exceeds .0005",
    •             take a light truing cut across the face of the mounting plate.
FOR HARDINGE AND ELGIN LATHE
THREADED & BLANK MOUNTINGS FOR ACCRA-SET CHUCKS
TYPE A AMERICAN STANDARD SHORT TAPER A-1 & A-2 SPINDLES
TYPE D MOUNTING PLATES - "CAMLOCK"
TYPE L AMERICAN STANDARD LONG TAPER KEY DRIVE SPINDLE